The new MultiSwitch from
The power sources to a MultiSwitch can be a combination of two independent mains supplies, uninterruptible power supplies or a combination of the two. Each source has to be rated to support the full load placed on the eight output sockets. MultiSwitch can be installed with a single power source to allow the dual feed option to be activated at a later date in the growth of the network.
If one of the power sources fails or falls outside specification, MultiSwitch powers the loads automatically from the second power source - instantaneously. As each of the eight output sockets is independent of the others, a short circuit or load fault is automatically isolated to prevent disruption to other loads or crashing of the MultiSwitch device itself. Users can set each of the output sockets to draw power from either of the sources or to switch off if one of them fails.
MultiSwitch has a front panel advanced LCD technology to provide information on load VA status, alarms and key measurements. It also provides remote monitoring in the form of RS232 or Simple Network Management Protocol (SNMP) communications.
MultiSwitch is designed for 19” rack mounting and is 2U high with a depth of 360mm. The MultiSwitch comes with a 2 year warranty and a software configuration pack. The recommended retail price in the
“Riello UPS recently secured the installation of two hundred MultiSwitch devices into the voice and data network at
For more product information visit www.riello-ups.co.uk or call the
Ends – 390 words